加入購物車成功！
- 產品名稱：YH，YHF welding machine cable welding handle wire
- 瀏覽：
- 添加時間：2025-04-22 09:32:44
- 推薦度：
YH電焊機電纜產品說明：
YH welding machine cable product description:
本產品適用于對地電壓交流不超過200V和脈動直流峰值400V電焊機用二次側接線及連接電焊鉗.是適用于電焊機二次側接線及連接電焊鉗的專用電纜,額定電壓交流不超過200V和脈動直流峰值400V。結構為單線芯,采用多股軟導線復絞制成。導電線芯外面采用耐熱聚酯薄膜絕緣帶繞包,*外層用橡皮制成的絕緣兼護套做為保護層。
This product is suitable for secondary side wiring and connection of welding tongs for welding machines with ground voltage AC not exceeding 200V and pulsating DC peak 400V It is a specialized cable suitable for the secondary side wiring of welding machines and connecting welding tongs, with a rated voltage of AC not exceeding 200V and a pulsating DC peak value of 400V. The structure is a single core, made by twisting multiple strands of flexible wires. The conductive wire core is wrapped with heat-resistant polyester film insulation tape, and the outer layer is made of rubber insulation and sheath as a protective layer.
電焊機電纜型號
Welding machine cable model
型號 名稱
Model name
YH 天然膠護套電焊機電纜
YH natural rubber sheathed welding machine cable
YHF 氯丁或其它相當?shù)暮铣赡z彈性體護套電焊機電纜
YHF chloroprene or other equivalent synthetic rubber elastomer sheathed welding machine cable
YH電焊機電纜的使用要求：
Requirements for the use of YH welding machine cables:
(1)YH電纜是在低電壓(*高電壓為200V)大電流的條件下工作,要求具有一定耐性。
(1) YH cables operate under low voltage (200V for high voltage) and high current conditions, requiring a certain level of resistance.
(2)焊把線電纜長期允許工作溫度不應超過65℃。
(2) The long-term allowable working temperature for welding cable should not exceed 65 ℃.
(3)電機引接線電纜頻繁地移動，扭繞和施放,要求柔軟,彎曲性能好。
(3) The motor lead wire cable frequently moves, twists and releases, requiring softness and good bending performance.
(4)在施放中易受到尖銳鋼鐵構件的刮、擦,故要求電纜絕緣抗撕、耐磨等機械性能好。
(4) It is prone to scratching and rubbing by sharp steel components during deployment, so it is required that the cable insulation has good mechanical properties such as tear resistance and wear resistance.
(5)使用環境條件復雜,如日曬、水沸、接觸泥水、機油、酸堿液體等,要求有一定的耐氣候性和耐油、耐溶劑性。
(5) The usage environment is complex, such as exposure to sunlight, boiling water, contact with mud and water, engine oil, acidic and alkaline liquids, etc., requiring a certain degree of weather resistance, oil resistance, and solvent resistance.
(6)有時會碰到熱焊件,要求耐熱變形性好。
(6) Sometimes it comes into contact with hot welded parts, requiring good heat resistance and deformation resistance.
(7)經常移動,要求外徑小,重量輕。由于對此種電纜電性能要求不高,且使用環境條件復雜,在結構上要求滿足各種復雜的環境因素是不適宜的。使用時注意改善使用條件,防止外來破壞。
(7) Frequently moving, requiring small outer diameter and light weight. Due to the low requirements for the electrical performance of this type of cable and the complex environmental conditions of its use, it is not suitable to require the structure to meet various complex environmental factors. Pay attention to improving the usage conditions and preventing external damage during use.
電焊機電纜YH電纜 全稱高強度橡套電焊機電纜，俗稱焊把線，是YC電纜（通用橡套電纜）的一種。用于電焊機二次側接線及連接電焊鉗、電焊機的專用電纜，其特性是電阻大、電壓低。工作電壓一般為450V到750V。
YH cable, also known as high-strength rubber sheathed welding machine cable, commonly known as welding wire, is a type of YC cable (universal rubber sheathed cable). Special cables used for secondary wiring of welding machines and connecting welding tongs and welding machines, characterized by high resistance and low voltage. The working voltage is generally between 450V and 750V.
